IGET BAR PRO 10000 MANGO ICE

IGET BAR PRO 10000 MANGO ICE: The Ultimate Disposable Vape Experience

---

IGET BAR PRO 10000 Mango Ice is a sealed, non-rechargeable portable device within the IGET BAR PRO series, engineered with a 1.2Ω mesh heating assembly, a 2000mAh built-in power source, and a 20ml integrated reservoir. The IGET BAR PRO series represents an evolution of the original IGET Bar platform — building on the same non-rechargeable, sealed-unit architecture while adding increased reservoir capacity (20ml vs. the IGET Bar’s 12ml), a higher-capacity power source (2000mAh vs. 1500mAh), and a mesh heating configuration designed to improve thermal distribution compared to the standard coil used in earlier models. Multiple independent Australian retail sources confirm the non-rechargeable design, coil resistance of 1.2Ω, and physical dimensions (44.1 × 22.5 × 96.5 mm, 93 g).

The IGET brand is owned by Shenzhen Huaxinyu Technology Co., Ltd., a manufacturer established in 2017 that operates a 100,000-grade dust-free production facility with integrated assembly lines covering power source installation, consumable filling, casing assembly, usage testing, and transport environment testing. The company has publicly stated that IGET products are distributed exclusively through official channels to international markets and that domestically circulated IGET products in the Chinese market are counterfeit — a stance that reinforces the importance of purchasing from authorised, documented retail channels. In Australia, the IGET BAR trademark is registered under class 34 (cigarette cases; cigarette filters; cigarette holders; electronic cigarettes; flavourings, other than essential oils, for use in electronic cigarettes; oral vaporizers for smokers) with a priority date of 23 August 2024 and ownership attributed to Shenzhen Huaxinyu Technology Co., Ltd.

Profile Architecture: Mango and Cooling — A Two-Component Structure

The Mango Ice profile follows a two-component fruit-plus-cooling architecture — a structural approach that pairs the sweet, tropical character of ripe mango with a cooling finish. This places it in the same structural category as the Grape Ice variant in the IGET BAR PRO range, but with a fundamentally different fruit ester profile: where Grape Ice relies on methyl anthranilate for its defining concord grape character, Mango Ice draws its identity from the lactone and ester fraction characteristic of mango fruit.

The mango component is driven primarily by two lactone compounds: δ-decalactone (C₁₀H₁₈O₂, molecular weight 170.25 g/mol) and γ-octalactone (C₈H₁₄O₂, molecular weight 142.20 g/mol). These lactones — along with supporting esters including ethyl butyrate, ethyl hexanoate, and methyl benzoate — are the key odorants responsible for the creamy, sweet, slightly peach-adjacent tropical character that defines ripe mango aroma. Research on mango volatiles has identified over 300 aromatic compounds, with monoterpenes (δ-3-carene, limonene, α-pinene), esters, and lactones as the dominant classes. δ-decalactone in particular is described in the flavour chemistry literature as having a creamy, coconut-like, and fruity character that provides the heavy, rounded body typical of mango profiles.

The cooling component employs menthol — a monoterpene alcohol (C₁₀H₂₀O, molecular weight 156.27 g/mol) — that activates TRPM8 (transient receptor potential melastatin 8) ion channels on sensory neurons, producing a cooling sensation by binding to cold-sensitive receptors. In the Mango Ice profile, the cooling component is calibrated as a secondary structural element — it arrives on the exhale and provides a palate-cleansing finish that resets the sensory apparatus between activations without overwhelming the mango ester profile.

The temporal sequencing follows the differential volatility of the two component groups. The lighter mango esters (ethyl butyrate, ethyl hexanoate) present first on the inhale, providing an immediate fruity, tropical impact. The heavier lactones (δ-decalactone, γ-octalactone) arrive in the mid-range, carrying the characteristic creamy mango body. The menthol cooling presents on the exhale, providing a clean, cooling finish. Third-party flavour descriptions characterise the Mango Ice as “sweet mango with a cool icy finish, balanced and smooth from the first puff to the last” — a description consistent with the fruit-plus-cooling structural dynamic described above.

Mesh Heating Assembly: 1.2Ω Coil and Two-Component Thermal Management

The IGET BAR PRO 10000 employs a mesh heating configuration with a coil resistance of 1.2Ω — a value confirmed by multiple independent Australian retail sources. In a mesh system, the heating surface is a perforated metal sheet rather than a conventional single-strand wire coil. The increased surface area allows for more even heat distribution across the consumable material, reducing the incidence of localised hotspots that cause thermal degradation of volatile aromatic compounds.

This thermal architecture has specific relevance for a two-component profile like Mango Ice, where the mango ester/lactone fraction and the menthol cooling compound have substantially different volatility characteristics. The lighter mango esters (ethyl butyrate, molecular weight 116.16 g/mol; ethyl hexanoate, molecular weight 144.21 g/mol) are relatively volatile and vaporize at lower temperatures. The heavier lactones (δ-decalactone, 170.25 g/mol; γ-octalactone, 142.20 g/mol) require sustained, moderate heat to fully express. Menthol (156.27 g/mol) vaporizes at temperatures between the lighter esters and the heavier lactones.

In a conventional single-strand heating element with uneven temperature distribution, the lighter mango esters and menthol are consumed disproportionately early in the device’s life, while the heavier lactones — particularly δ-decalactone — may not fully express until later activations. The user experiences a profile that shifts from balanced mango-cooling toward a heavier, more lactone-dominant character as the device ages: the bright, fruity top notes fade, and the cooling sensation may become less pronounced as the menthol supply is depleted.

A mesh configuration mitigates this by spreading the thermal load across a wider surface area, reducing peak temperatures at any single contact point. This allows the different mango aromatic compounds and the menthol cooling compound to vaporize in closer to their intended proportions across more of the device’s rated operational life.

Energy Management and the Non-Rechargeable Architecture

The IGET BAR PRO 10000 is built around a non-rechargeable 2000mAh power source — a deliberate step up from the 1500mAh battery in the standard IGET Bar. This power source is calibrated to match the 20ml consumable reservoir, ensuring that neither component significantly outlasts the other during normal use.

The decision to use a non-rechargeable architecture reflects a specific engineering trade-off. A rechargeable design would require a charging port, charging circuit, and power-management controller — each a potential point of failure. The charging port is vulnerable to pocket lint, dust, and moisture ingress over weeks of daily carry. The non-rechargeable design eliminates these failure modes entirely, at the cost of replacing the complete unit when either the consumable or the power source is depleted.

The original product page accurately notes that the device “comes fully charged and ready to use — no refilling, no charging, and no settings to adjust”.

Physical Dimensions and Build

The IGET BAR PRO 10000 measures 44.1 × 22.5 × 96.5 mm and weighs 93 grams — specifications extracted from the original product page data sheet and confirmed by multiple independent Australian retail sources. The body uses polycarbonate and aluminium alloy (PC+ALU construction), selected for impact resistance, chemical durability, and light weight.

At 93g, the device is notably lighter than the IGET ONE 12000 (118.9g), reflecting its smaller reservoir (20ml vs. 18–25ml) and lower-capacity power source (2000mAh vs. 2700mAh). It is comparable in weight to the WALA POP 10000 (91.5g at 47 × 22 × 100mm).

The draw-activated mechanism requires no priming, no power cycling, and no user-facing controls. The original product page describes it as “simple and straightforward — just open the package and inhale to activate”.

IGET BAR PRO Positioning Within the OZVAPE Shop Catalogue

The IGET BAR PRO 10000 occupies a mid-to-high-capacity tier within the IGET product family. It sits above the entry-level IGET Bar (3500 activations, 1500mAh, 12ml) and below the IGET ONE 12000 (up to 12,000 activations, 2700mAh, 18–25ml, dual-mode operation with curved LED display). Compared to the IGET ONE 12000, the BAR PRO is lighter (93g vs. 118.9g), more compact (96.5mm vs. 107.7mm length), and simpler to operate — it has no mode selector button, no LED display, and no user-facing controls of any kind. The trade-off is reduced operational capacity (10,000 activations vs. up to 12,000) and the absence of status monitoring and performance mode selection.

Usage Patterns and Suitability

The IGET BAR PRO 10000 Mango Ice is suited to users who prefer a tropical fruit-plus-cooling profile — one where the structural dynamic is sweet, lactone-driven mango on the inhale, followed by a cooling finish on the exhale. The cooling component provides a palate-cleansing function, making the profile suitable for all-day use where a purely sweet mango profile might become cloying across extended sessions.

The non-rechargeable, sealed architecture makes the device suitable for users who do not want to manage charging cycles. The 2000mAh power source is calibrated to support the full rated operational life without external charging.

Users who prefer a mango profile without the cooling finish may wish to compare against the standard fruit-forward variants in the IGET ONE 12000 range. Users who prefer a different fruit-plus-cooling profile may wish to compare against the Grape Ice variant in the IGET BAR PRO range. Users who prefer a more complex multi-component fusion with cooling may wish to compare against the Grapefruit Guava Lemon Ice variant. Users who want a higher-capacity device with status monitoring and selectable performance modes may wish to compare against the IGET ONE 12000 variants.

Sourcing and Traceability

IGET BAR PRO devices supplied through OZVAPE Shop are obtained through authorised distribution channels with batch-level traceability documentation. This sourcing discipline is the primary mechanism by which users can distinguish factory-certified units from non-authorised inventory. IGET’s manufacturer, Shenzhen Huaxinyu Technology Co., Ltd., has publicly stated that IGET products are distributed exclusively through official channels to international markets and that domestically circulated IGET products in the Chinese market are counterfeit. A device purchased from a documented channel carries a verifiable chain of custody from the manufacturing facility to the point of sale; a device from an unknown channel carries no such assurance, and its internal components, material quality, and safety testing cannot be independently verified.

OZVAPE Shop maintains receiving protocols designed to verify packaging integrity and batch-code consistency before inventory reaches users. These protocols include visual inspection of outer packaging for tampering, verification of batch codes against shipment documentation, and periodic sampling to confirm that on-hand inventory matches the specifications published on the product page. Units that do not pass these checks are quarantined and returned to the distributor. This process operates in the background of every fulfilled order.

---

Key Features

• 🎯 10,000 Puffs: A long-lasting vaping companion designed for extended use.

• ⚡ Powerful 2000mAh Battery: Built for reliability and consistent performance.

• 💧 20ml Pre-filled Capacity: Generous Capacity infused with 5% (50mg/ml) Classic-Formula for a balanced throat hit.

• 🎨 Advanced Mesh Coil Technology: Enhances options richness and vapor production.

• 🔒 Draw-Activated Mechanism: No buttons, no fuss — just instant, effortless vaping.

• 🛡️ Compact & Durable: Crafted with a lightweight aluminum alloy body for style and resilience.

---

Why Choose IGET BAR PRO 10000 MANGO ICE?

• Unmatched Longevity: Ideal for heavy users seeking reliability.

• Rich Options Portfolio: Explore 13 delicious options, from fruity blends to classic profiles.

• User-Friendly Design: Whether you’re new to vaping or a seasoned enthusiast, the IGET Bar Pro guarantees a seamless experience.

---

Technical Specifications

---

Ready to Redefine Your Vape Routine?
The IGET BAR PRO 10000 MANGO ICE merges innovation with convenience, offering a premium alternative to traditional vaping. Embrace the future of disposable e-cigarettes — where options, performance, and durability unite.

🚀 Try IGET Bar Pro Today and Taste the Difference!