IGET BAR PRO 10000 Grape Ice

IGET BAR PRO 10000 Grape Ice

IGET BAR PRO 10000 Grape Ice is a sealed, non-rechargeable portable device within the IGET BAR PRO series, engineered with a 1.2Ω mesh heating assembly, a 2000mAh built-in power source, and a 20ml integrated reservoir. The IGET BAR PRO series represents an evolution of the original IGET Bar platform — building on the same non-rechargeable, sealed-unit architecture while adding increased reservoir capacity (20ml vs. the IGET Bar’s 12ml), a higher-capacity power source (2000mAh vs. 1500mAh), and a mesh heating configuration designed to improve thermal distribution compared to the standard coil used in earlier IGET Bar models. Multiple independent Australian retail sources confirm the non-rechargeable design and coil resistance of 1.2Ω.

The IGET brand is owned by Shenzhen Huaxinyu Technology Co., Ltd., a manufacturer established in 2017 that operates a 100,000-grade dust-free production facility with integrated assembly lines covering power source installation, consumable filling, casing assembly, usage testing, and transport environment testing. The company has publicly stated that IGET products are distributed exclusively through official channels to international markets and that domestically circulated IGET products in the Chinese market are counterfeit — a stance that reinforces the importance of purchasing from authorised, documented retail channels. In Australia, the IGET BAR trademark is registered under class 34 (cigarette cases; cigarette filters; cigarette holders; electronic cigarettes; flavourings, other than essential oils, for use in electronic cigarettes; oral vaporizers for smokers) with a priority date of 23 August 2024 and ownership attributed to Shenzhen Huaxinyu Technology Co., Ltd.

Profile Architecture: Grape and Cooling — A Two-Component Structure

The Grape Ice profile follows a two-component fruit-plus-cooling architecture. The primary fruit component is driven by methyl anthranilate (C₈H₉NO₂, molecular weight 151.16 g/mol) — the defining aromatic ester of Concord grape (Vitis labrusca), occurring naturally in neroli, ylang-ylang, and bergamot essential oils, and characterised in flavour chemistry literature as having a fruity grape odour with a musty and berry nuance. Methyl anthranilate is concentration-dependent: at higher concentrations, it presents with citrus and grape fruity aromas with a slightly bitter, astringent edge; at lower concentrations, it exhibits fresh, sweet, floral notes.

In a grape-flavoured consumable formulation, methyl anthranilate is typically blended with supporting esters — ethyl butyrate (for fruity sweetness), ethyl acetate (for brightness), and isoamyl acetate (for body) — to round out the profile and prevent the bitterness associated with high-concentration methyl anthranilate from becoming perceptible. Patent literature describes a typical grape ester ratio: methyl anthranilate at 4 parts, supported by ethyl butyrate at 0.4 parts and ethyl acetate at 2 parts, with N-methyl methyl anthranilate at 5 parts providing depth.

The cooling component, designated by the “Ice” identifier in the variant name, employs menthol — a monoterpene alcohol that activates TRPM8 (transient receptor potential melastatin 8) ion channels, producing a cooling sensation by triggering cold-sensitive receptors in sensory neurons. Third-party flavour descriptions characterise the Grape Ice as “sweet sun-ripened grape flavour with a light cooling menthol finish”.

The temporal sequencing within each activation follows the differential volatility of the two component groups: the lighter supporting esters (ethyl acetate, ethyl butyrate) present first on the inhale, providing an immediate bright, fruity impact; the heavier methyl anthranilate arrives in the mid-range, carrying the characteristic grape identity; and the menthol cooling component presents on the exhale, providing a palate-cleansing finish that resets the sensory apparatus between activations.

Mesh Heating Assembly: Engineering and Thermal Management

The IGET BAR PRO 10000 employs a mesh heating configuration with a coil resistance of 1.2Ω — a value confirmed by multiple independent Australian retail sources. The original product page states only “Mesh Coil” without specifying the resistance value; OZVAPE Shop has supplemented this specification. In a mesh system, the heating surface is a perforated metal sheet rather than a conventional single-strand wire coil. The increased surface area allows for more even heat distribution across the consumable material, reducing the incidence of localised hotspots that cause thermal degradation of volatile aromatic compounds.

This thermal architecture has specific relevance for a two-component profile like Grape Ice, where the grape ester fraction and the menthol cooling compound have substantially different volatility characteristics. The lighter supporting esters (ethyl acetate, ethyl butyrate) are relatively volatile. Methyl anthranilate, with its higher molecular weight (151.16 g/mol) and moderate volatility, requires sustained, moderate heat to fully vaporize without degradation. Menthol, being more volatile than methyl anthranilate, vaporizes at lower temperatures. In a conventional heating element with uneven temperature distribution, the supporting esters and menthol are consumed disproportionately early in the device’s life, while methyl anthranilate may not fully express until later activations — producing a profile where the grape-cooling balance shifts across the device’s operational lifespan.

A mesh configuration mitigates this by spreading the thermal load across a wider surface area, reducing peak temperatures at any single contact point, and allowing the different aromatic compounds to vaporize in closer to their intended proportions across more of the device’s rated operational life.

Energy Management and the Non-Rechargeable Architecture

The IGET BAR PRO 10000 is built around a non-rechargeable 2000mAh power source — a deliberate step up from the 1500mAh battery in the standard IGET Bar. This power source is calibrated to match the 20ml consumable reservoir, ensuring that neither component significantly outlasts the other during normal use.

The decision to use a non-rechargeable architecture reflects a specific engineering trade-off. A rechargeable design would require a charging port, charging circuit, and power-management controller — each a potential point of failure. The charging port is vulnerable to pocket lint, dust, and moisture ingress over weeks of daily carry. The non-rechargeable design eliminates these failure modes entirely, at the cost of replacing the complete unit when either the consumable or the power source is depleted.

The original product page claims the device requires no charging — this is accurate for the non-rechargeable architecture — and characterises it as “Zero Maintenance”. While no routine user-performed maintenance (charging, refilling, coil replacement) is required, the device remains a sealed consumable unit that is replaced in its entirety at end of life.

Physical Dimensions and Build

The IGET BAR PRO 10000 measures 44.1 × 22.5 × 96.5 mm and weighs 93 grams — confirmed by multiple independent Australian retail sources. The body uses aluminium alloy and polycarbonate (PC+ALU construction), selected for impact resistance, chemical durability, and light weight. At 93g, the device is notably lighter than the IGET ONE 12000 (118.9g), reflecting its smaller reservoir (20ml vs. 18–25ml) and lower-capacity power source (2000mAh vs. 2700mAh).

The original product page claims the device has “no buttons and no complicated settings” — this is accurate for the draw-activated mechanism, which requires no priming, no power cycling, and no mode selection. The user removes the device from its packaging and inhales to activate, making it a simpler interface than the dual-mode selector found on the IGET ONE 12000 series.

IGET BAR PRO Positioning Within the OZVAPE Shop Catalogue

The IGET BAR PRO 10000 occupies a mid-to-high-capacity tier within the IGET product family. It sits above the entry-level IGET Bar (3500 activations, 1500mAh, 12ml) and below the IGET ONE 12000 (up to 12,000 activations, 2700mAh, 18–25ml, dual-mode operation with curved LED display) and the IGET LEGEND (4000 activations). Compared to the IGET ONE 12000, the BAR PRO is lighter (93g vs. 118.9g), more compact (96.5mm vs. 107.7mm length), and simpler to operate — it has no mode selector button, no LED display, and no user-facing controls of any kind. The trade-off is reduced reservoir capacity (20ml vs. 18–25ml) and the absence of status monitoring and performance mode selection.

The original product page characterises the BAR PRO series as “combining style, convenience, and performance” and the Grape Ice edition as having a “lightweight aluminum body, a sleek design, and a format that is easy to carry”. These are marketing characterisations. What can be stated factually is that the device measures 44.1 × 22.5 × 96.5 mm, weighs 93g, uses an aluminium and polycarbonate body construction, and is designed as a sealed, non-rechargeable unit with a draw-activated firing mechanism — specifications that place it in the compact, portable segment of the market for devices in this capacity class.

Usage Patterns and Suitability

The IGET BAR PRO 10000 Grape Ice is suited to users who prefer a fruit-plus-cooling profile — where the structural dynamic is grape sweetness on the inhale followed by a menthol-driven cooling finish on the exhale — in a compact, lightweight, and operationally simple format. The absence of buttons, mode selectors, and displays makes the device accessible to users who value simplicity and do not wish to interact with status screens or performance settings.

The non-rechargeable, sealed architecture makes the device suitable for users who do not want to manage charging cycles or replace components. The 2000mAh power source is calibrated to support the full rated operational life without external charging.

Users who prefer a grape profile without the cooling finish may wish to compare against the standard Grape variant in the IGET ONE 12000 range. Users who want a grape profile with a candy-style confectionery character may wish to compare against the Chuppa Chupps Grape variant. Users who prefer a higher-capacity device with status monitoring and selectable performance modes may wish to compare against the IGET ONE 12000 Grape Ice variant or the ALIBARBAR INGOT series.

Sourcing and Traceability

IGET BAR PRO devices supplied through OZVAPE Shop are obtained through authorised distribution channels with batch-level traceability documentation. This sourcing discipline is the primary mechanism by which users can distinguish factory-certified units from non-authorised inventory. IGET’s manufacturer, Shenzhen Huaxinyu Technology Co., Ltd., has publicly stated that IGET products are distributed exclusively through official channels to international markets and that domestically circulated IGET products in the Chinese market are counterfeit. A device purchased from a documented channel carries a verifiable chain of custody from the manufacturing facility to the point of sale; a device from an unknown channel carries no such assurance, and its internal components, material quality, and safety testing cannot be independently verified.

OZVAPE Shop maintains receiving protocols designed to verify packaging integrity and batch-code consistency before inventory reaches users. These protocols include visual inspection of outer packaging for tampering, verification of batch codes against shipment documentation, and periodic sampling to confirm that on-hand inventory matches the specifications published on the product page. Units that do not pass these checks are quarantined and returned to the distributor. This process operates in the background of every fulfilled order.

Why choose this product? It offers a reliable puff count, smooth mesh coil Option, easy draw activation, and a refreshing grape-ice profile in a premium disposable format.

Key Benefits

• Sweet grape ice Option with a refreshing finish
• Up to 10,000 puffs for extended use
• 2000mAh battery for dependable performance
• 20ml pre-filled e-Capacity for long-lasting vaping
• Mesh coil for smoother Option and vapor
• Draw-activated design for easy operation
• Lightweight aluminum body for portability
• Simple disposable format with no refilling or charging

How to Use

Remove the device from the package and inhale through the mouthpiece to activate it. There are no buttons to press and no settings to adjust. Use it until the e-Capacity or battery is depleted, then dispose of it responsibly according to local regulations.

Technical Specifications

Brand	IGET
Series	IGET BAR PRO
Option	Grape Ice
Puff Count	Up to 10,000
Battery	2000mAh
Capacity	20ml
ENDS Strength	5% (50mg/ml)
Coil	Mesh Coil
Material	Aluminium
Activation	Draw-activated
Weight	93g